Short answer
There is no single series that is the right choice for every room. To compare a Midea Solunar with a Midea Solstice, start with the exact indoor and outdoor model codes and the capacity required by the room. Then compare the official data for that model pair, the comfort features you will use, installation requirements and the support available in Cyprus.
The same BTU label or series name does not by itself prove that two models have the same performance, energy use or capabilities.
What current official Italian-market product information says
Midea's current Italian-market information describes features in each series, including AI EcoMaster and SmartHome connectivity. The Solunar page also lists Air Magic+, while the 2026 Solstice leaflet describes 0° airflow along the ceiling and 180° cascade airflow. See the Midea Solunar series page and the Midea Solstice 2026 leaflet.
These are manufacturer descriptions for specific series and a specific market. They are not a comparative test or a guarantee that every feature is present on every code or version supplied in Cyprus.
How to make a fair comparison
1. Confirm the model codes
Record the complete indoor and outdoor unit codes. Make sure you are comparing equivalent configurations, such as single-split with single-split, rather than different versions or multi-unit combinations.
2. Size the unit for the room first
Before comparing product families, confirm the room's cooling and heating load. Orientation, glazing, shading, insulation, room use and unit position all affect the selection. See the air-conditioner sizing guide.
3. Compare performance data from the right documents
For the exact codes, check the current technical fiche, energy label and installation manual for the destination market. Compare rated and available cooling/heating capacity, seasonal efficiency, sound data and operating limits under the same conditions. Do not transfer figures from another market or another capacity in the series.
4. Consider comfort and day-to-day use
Think about unit position, airflow direction, noise, filter cleaning and the control features that matter in the actual room. A feature that does not suit the layout or the user's habits should not decide the selection on its own.
5. Check that the installation is feasible
Confirm pipe routes and limits, elevation difference, electrical requirements, condensate drainage, outdoor-unit location and service access. Limits depend on the exact code and must come from its installation manual.
What to confirm in Cyprus
The local product catalogue lists 12,000 BTU models from both families: Midea Solunar 12,000 BTU and Midea Solstice 12,000 BTU. Use these pages to confirm the listed codes, then request the current local brochure or manual before relying on a technical specification.
Also confirm current availability, warranty and support for the exact model. A product page is not confirmation of stock.
Conclusion and next step
The right choice between Solunar and Solstice depends on the exact model and the room, not only on the series name. Send the room dimensions and use, photos of possible unit positions and both model codes to Thomas Moudouros Ltd so the matching technical documents can be compared.
See the air conditioner category for the wider range.