Speroni CM 22/27/32 Centrifugal Water Pumps

Description

Speroni CM 22/27/32 Centrifugal Water Pumps are single-impeller centrifugal water pumps for clean water, suitable for domestic, agricultural and industrial uses. Model variants and technical values are listed in the table exactly as provided by Speroni.

Applications

Suitable for clean water in domestic, agricultural and industrial applications, including water distribution through small and medium tanks, irrigation systems and pressure boosting where installation conditions allow.

Limits of use

• Liquid temperature up to 35Β°C
• (for home use according to EN 60335-2-41)
• Temperature max. liquid: 60Β°C (for other uses)
• Ambient temperature up to 40Β°C
• Total suction lift up to 7 m
• Continuous duty
• Minimum efficiency index (BEP) MEI ≥ 0,4

Motor

• Single-phase 230V-50Hz
• Three-phase 230/400V-50Hz
• Two-Pole induction motor (n = 2850 min-1)
• Insulation Class F
• Protection IP 44

Materials

• Pump body: Cast Iron
• Motor Support: Cast Iron
• Impeller Stainless Steel AISI 304
• Shaft with rotor: Stainless Steel AISI 304
• Mechanical seal: Ceramic/Graphite/NBR

Technical information

Available model variants and key technical values are shown in the table below. Model names, HP, kW, L/min, H(m), connections and SKU are preserved from Speroni source data.

CTA

Contact us for availability, technical details, and correct model selection.

Technical table

Model	Phase	Nominal power HP	Nominal power kW	Power consumption kW	Flow rate	Head	Suction connection	Delivery connection
CM 22	Single-phase	0.5	0.37	0.65	100 L/min	20 m	1β€³	1β€³
CM 27	Single-phase	0.75	0.55	0.9	100 L/min	27 m	1β€³	1β€³
CM 32	Single-phase	1	0.75	1.2	125 L/min	29 m	1β€³	1β€³
C 32	Three-phase	1	0.75	1.2	125 L/min	29 m	1β€³	1β€³

Technical documents (6)

Cm 22 27 32PDFManuale Istruzioni CentrifughePDFCm 22PDFCm 27PDFCm 32PDFC 32PDF